Volumetric Flaw can be added into pipe, bend, or tee node and allows to check stresses in volumetric flaws using GB/T 19624-2019 code (China). Analysis results are printed in Flaw Stress Table
Property |
Description |
Name |
Element name. If checked then it shown in 3D view |
Flaw type Half of axial length, A Half of circumferential length, B Measured depth with corrosion allowance, C Measured wall thickness nearby flaw, T |
Outer and Inner Flaw on Pipe Defect on Bend Defect on Tee |
Tensile strength at operating temperature |
Tensile strength at operating temperature for pipe material |
To insert a ballasting weight, select the desired node and use the menu option: Insert > Flaw > Volumetric Flaw