PASS/NOZZLE-FEM 3.5. Program Manual

4.3. Allowable loads at the nozzle end in coordinates associated with main shell orientation (global CS)

Fig. 4.5. Coordinates system associated with main shell orientation (global)

Allowable individual loads at the nozzle end without influence of other loads, including pressure¹

Note:

1. When exceeding any loading component, a reinforcing of nozzle connection is required. Or this loading component must be reduced.

Allowable loads at the nozzle end at the design pressure²

Note:

2. When exceeding one or several loading components, a supplementary calculation of strength is required.